This cross steer rack & pinion was adapted from the 1928-34
cross steer rack & pinion design. It uses the same rack with a slower
ratio to ease steering effort and comes with a different bracket that bolts
to the frame on the drivers side rail using the factory rivet holes.
Note: works only with a stock or 2 drop axle. If using a wish-bone
type suspension, the wish bones must be split at least around the transmission. |
1935-40 Ford Cross
Steer Rack & Pinion |
8000510 |
1935-40, new build (no shaft kit) |
$670.00 |
|
|
|