 |
|
 | ||
|
| ||
|
|
|
| ||
|
| ||
|
| CPP's rear panard rod fits 8" or 9" Ford rear ends. | |
| A | Bolt axle bracket to third member as shown using the grade 8 bolts supplied. |
| B | Frame bracket should be mounted approximately 1-1/2" above the center of the third member mount with rearend positioned at normal ride height. This position will allow plenty of clearance for suspension travel up or down. Using the assembled bar as a guide, locate the frame bracket to the frame and weld in place. |
| C | Bolt panard rod to third member and frame bracket using hardware supplied. Adjuster should be installed on frame end of bar. |
 |
|
