| CPP’s quality upper and lower Totally Tubular™ control
arms are welded for maximum strength and visual impact. The lower control
arms have a helical stamped coil spring mount, just like they did from the
factory, which secures the coil spring into the lower control arm. The coil
mount has been improved to make installation even easier. The lower shock
mount is incorporated into the stamped coil plate and will also accept QA-1
coil over and Ridetech Shockwave™ units as well. This stamping is welded
around its entire perimeter. All arms that contain cross shafts are preassembled
with the cross shafts and pivot sleeves and have a safety feature that captures
both sides of the bushing, unlike the originals that were only retained
on the one side of the bushing under the head of the bolt. This unique feature
allows full control and virtually no flex on the control arm when cornering.
Arms are available in gloss black or silver powder coat. Economy import
arms also available for some applications. Note: 1955-57 and 1958-64 upper
arms allow for 5° extra caster. 6774ETA-K will lower vehicle 1-1/2". |
 |
TUBULAR CONTROL ARMS
