| Finally a bolt-on rack & pinion kit for the '67-'69 Power
Camaro! Requires no welding or chassis modification and allows you to add
rack & pinion steering with no bump steer which makes it perfect for
street use. Classic Performance rack & pinion comes mounted to its own
unique bracket that mounts to the bottom two control arm bolts on the rear
of the crossmember. To install, simply remove the existing bolts and replace
with the longer bolts provided, bolting the rack up into position. Then
unbolt the stock steering arms and replace them with new steering arms provided
and attach the provided outer tie-rod ends. Kit includes power rack &
pinion, attached to the bolt-on bracket, mounting hardware, new steering
arms and outer tie-rod ends, banjo fittings for the rack, and installation
instruction sheet. Kit works with both big block and small block engines. |
|
Power Rack & Pinion Kit
