|Springs are designed so that the lower end sets on the coil-over
shock and the upper end sets in the original spring bucket in the frame.
This allows for the use of a longer and lighter spring for more stored energy,
offering increased weight transfer. Greater durability is also achieved
by locating the spring pressure in the frame and not on a single stud. The
threaded aluminum body allows ride height adjustment and boasts an easy
bolt-in installation. The system includes aluminum body coil-over shocks,
specially designed conical springs and all mounting hardware. Note: Specify
spring rate (350, 400, 450, 500 or 550#) when ordering kit.