Due to their poor design, the adjustable eccentrics on
the lower control arms work themselves loose. Once they move your alignment
is shot. With our lower eccentric lockout kit you can convert your front
end to a modern upper shim setup. This means that your car will stay aligned
much longer and the car will be easier to align. ALIGNMENT SPECIFICATIONS:
1/4 degrees positive camber both sides
1 to 1-1/2 positive caster, no more than 1/4 degree difference side
to side
Set toe to "0" or 1/64 out
It may take 2 hours to get the above spec but you must adhere to
it to make it right. |