Our control arm sets are designed to add 5° of caster
while providing full wheel travel and minimal friction possible. They are
made from thick tubing to eliminate distortion from welding and hard use.
The bushings are made from self lubricating non-squeak patented plastic
that will out last any rubber or urethane. The billet 4140-alloy steel cross
shafts and sleeves are zinc plated for lasting performance. The sleeves
have an interlocking design that prevents the hardware from ever working
loose.
Simple bolt-in installation with no modification required.
They work with all factory and replacement power steering systems, and with
or without O.E. bump stops. Includes ball joints. |