All kits work with a stock rear-end. All are easy bolt-on
installations. Kits include: rotors, loaded calipers with built-in E-brake,
rubber hose kit, E-brake cable, and all mounting hardware. Will work with
C-clip eliminators. Some modifications may be neccessary. Note: Kits will
not fit early 1963 with pressed-on backing plates. #6366EBC does not fit
long beds, custom line cable required. Also, kits fit original 12 bolt rear
end only. These kits will NOT fit Dana rear ends. *Shown with optional
upgraded rotors. |
|