CPPs tubular trailing arms are manufactured with a laser
cut and formed spring platform fabricated to a CNC bent heavy wall 2
DOM tube body. The bushings are made of a NEW patented D-Spec
heat resistant, self-lubricating material that offers long life and a remarkably
quiet, comfortable ride. The complete kit was designed with lowered trucks
in mind, correcting the pinion angle that is affected with lowered coil
and air springs. The crossmember will bolt into the original location and
works with factory trailing arms. This will correct pinion angle associated
with a lowered truck and offer 3 by 5 exhaust openings. The
Trailing Arms will bolt up as a direct replacement for the original trailing
arms and can be used with the original crossmember, rear axle and coil springs |
|