| This one piece spindle design allows you to lower the vehicle
2” without affecting steering geometry or suspension travel. No need
for bolt-on caliper brackets or steering arm. Cast from the highest quality
Ductile Iron with 4140 Chrom-moly CNC machined pins. Accepts factory ball
joints and tie rod ends with no need for any type of upper ball joint spacer.
Part #5557DS works with most 14” wheels and accepts 1979-81 Malibu
rotors and 1982-93 S-10 calipers. Part #5864DS works with most 15”
wheels and accepts 1979-81 Camaro rotors and 1970-77 Camaro calipers. |
|
OLD SCHOOL 2" Drop Spindles for 14"
Wheels
