Ultimate LS Induction Systems
FiTech EFI continues to bring the highest
quality products to the market at the most competitive prices. The Ultimate
LS Induction System features the same industry leading EFI control that
is in all FiTech EFI systems. FiTech EFI has more fuel injection systems
in use than any aftermarket fuel injection company. Let that industry leading
technology work for you in your LS powered vehicle.
Complete Self Tuning Induction Systems
for LS engines designed for the do-it-yourself Hot Rodder to the professional
EFI tuner! This system is ready to go with everything needed to complete
the induction system of your LS engine and get you on the road easily and
faster than any system on the market today. Forget sourcing mismatched parts
and cutting and splicing old harnesses and re-flashed ECUs from Craigs
List tuners. FiTechs Ultimate EFI is a complete Kit. Suitable
for that junkyard 5.3 to a stroker 427, we have you covered! Check out the
list of features inside this brochure and you will wonder why its
never been so simple to ditch that old factory hardware or top off that
fresh long block. We have taken the work out of getting your new or pull-out
LS up and running in a flash. Thats why we call this kit the ULTIMATE
EFI. |
500 HP
Ultimate LS Kit for LS1/LS2/LS6 w/out Transmission Control
Part No. FI70001......$1,806.00
|
500 HP
Ultimate LS Kit for LS1/LS2/LS6 w/ Transmission Control
Part No. FI70002.......$2,107.00
|
750 HP
Ultimate LS Kit for LS1/LS2/LS6 w/out Transmission Control
Part No. FI70003......$2,107.00
|
750 HP
Ultimate LS Kit for LS1/LS2/LS6 w/ Transmission Control
Part No. FI70004......$2,410.00
|
500 HP
Ultimate LS Kit for LS3/L92 w/out Transmission Control
Part No. FI70011......$1,896.00
|
500 HP
Ultimate LS Kit for LS3/L92 w/ Transmission Control
Part No. FI70012......$2,107.00
|
750 HP
Ultimate LS Kit for LS3/L92 w/out Transmission Control
Part No. FI70013......$2,107.00
|
750 HP
Ultimate LS Kit for LS3/L92 w/ Transmission Control
Part No. FI70014......$2,410.00
|
ECU
Ultimate LS Standalone ECU w/out Transmission Control
Part No. FI70050......$959.00
|
ECU
Ultimate LS Standalone ECU w/ Transmission Control
Part No. FI70051......$1,202.00
|
|

Ultimate LS Kit Contents
92MM or 102MM* Billet Alum Throttle Body
Handheld Controller with color touch screen
Windshield mount for touch screen Controller
36 or 66* lb/hr Injectors
High volume fuel rails
Fabricated Aluminum Intake Manifold
Plug and Play Wiring Harness
BAR MAP Sensor
Throttle Position Sensor
Idle Air Control Sensor
Coolant Temp Sensor
Bosch Wide band O2 Sensor
Stainless Oxygen Sensor bung
AN fittings and fuel crossover
Two programmable fan control outputs |
-
- A List of features of the Ultimate LS Induction
System:
Low profile- 92mm or 102MM* inlet, aluminum fabricated
intake with 1500-6500 rpm power-band, 3mm construction tig welded, black
anodized with embossed Fitech logo. CNC machined with O-ring gaskets and
all hardware included.
Hi Flow Cable operated 92MM or 102MM* Throttle Body. Parabolic
inlet machining for smooth throttle transitions same as OE. Throttle Body
features progressive linkage pulley with double return spring and adjustable
stop.
Self learning ECU with Touch Screen controller for easy
setup and configuration.
Windshield Mount for control.
Sequential fuel and spark control with individual cylinder
trim.
Bosch wide band controlled (Self learning).
Stainless Oxygen Sensor bung (clamp or weld on).
24X and 58X crank and cam compatible.
Two programmable fan control outputs 1 BAR MAP Sensor
Coolant Temperature Sensor TPS IAC Sensor.
Tach Output Driver for most tachometers (5V).
Speedometer Output Driver for most speedometers.
Compatible with car and truck coils.
On the fly programmable target AFR and Timing (if desired).
36 or 66* lb. flow-matched injectors.
Fuel pump relay output.
Custom wire harness (uses factory coil pack sub harness).
Programmable Color touch screen Hand Held Controller with
data log features.
Windshield mount for touch screen Controller.
Custom cam friendly.
Knock Sensor Control.*
Dual Bosch Wide Band with dual trim control (Self Learning).*
3 BAR MAP Sensor Automatically detects up to 30
PSI boost.*
Available Transmission Control feature is suitable for
4L60, 4L65, 4L70, or 4L80 G.M. transmissions.
-
- * Asterisked items are 750 HP kits only
|
|