These springs are designed so that the lower end sets on the
coil-over shock and the upper end sets in the original spring bucket in
the frame. This allows for the use of a longer and lighter spring for more
stored energy, offering increased weight transfer. Greater durability is
also achieved by locating the spring pressure in the frame and not on a
single stud. The threaded aluminum body allows ride height adjustment and
boasts an easy bolt-in installation. The system includes aluminum body coil-over
shocks, specially designed conical springs and all mounting hardware. Note:
Specify spring rate (350, 400, 450, 500 or 550#) when ordering kit. Will
not work with Econo Control Arms. |
|