Finally a bolt-on rack & pinion kit requires no welding
or chassis modification and allows you to add rack & pinion steering
with no bump steer which makes it perfect for street use. Unisteer's rack
& pinion comes mounted to its own unique bracket that mounts to the
bottom two control arm bolts on the rear of the crossmember. To install,
simply remove the existing bolts and replace with the longer bolts provided,
bolting the rack up into position. Then unbolt the stock steering arms and
replace them with new steering arms provided and attach the provided outer
tie-rod ends. Kit includes power rack & pinion, attached to the bolt-on
bracket, mounting hardware, new steering arms and outer tie-rod ends, banjo
fittings for the rack, and installation instruction sheet. Kit works with
both big block and small block engines. Note: Special hose kit required
for power steering, please inquire.
Chrome Kit Shown |
|