The lower control arms have a helical stamped coil mount with
an integral shock mount. The lower shock mount is incorporated into the
stamped coil plate. The upper control arms are preassembled on new billet
chromolly 4130 cross shafts and pivot sleeves. CPP created a safety feature
with an interlocking shaft and sleeve design that prevents the bolts from
working loose even under severe stress created by hard corning. The CPP
exclusive pivot bushings are a patented self lubricating plastic that will
not squeak, and has a working temperature of over 400 degrees. These plastic
bushings refuse to break during impact testing and can absorb high shocks
loads that would otherwise be transferred thru the chassis. Note: Ball joints
are included. |
|