This is a true bolt-in with no cutting into the floor required.
Tucked drived shaft loop allows for exhaust clearance. Unequal length, adjustable
4-link eliminates wheel hop. Kits include: driveshaft loop, adjustable 4-link,
coil-over crossmember, coil-over shocks and adjustable trac bar. Available
options: adjustable billet coil-overs, torsion bar-style billet anti-roll
bar, and sub-frame connectors (for use with TCI IFS and 4-link kit only).
Note: 9" Ford rear-ends use an panard bar. Chevy rear-ends need a track
bar kit.
Please note that part numbers
529-5102-00, 529-5102-01, and 529-5102-02 do not work with mini tubbed or
tubbed applications. These kits are designed for stock wheel wells. Please
call for additional information. |
|