.

 

5557SWBK-D12

Shown with the “upgraded” drilled and slotted rotors.

5864SWBK-D12

Shown with the “upgraded” drilled and slotted rotors.

6769SWBK-D12

Shown with the “upgraded” drilled and slotted rotors.

6472SWBK-D12-UG

5557DS-12

5864DS-12

6472DS-12

6774DS-12

6472SS-12

6370SWBK-5D

6370SWBK-6OE-S

CP4S4

CP4S5

This new and revised kit has almost everything needed to add 12" disc brakes and 2" Drop Spindles to your disc or drum brake car, including New Loaded (with disc pads) Big piston calipers, 12" one-piece vented rotors, bearings, seals, dust caps, spindle nuts, hardware, and brake hoses. Works with most 15" or larger custom wheels. Provides a full 2 inch drop and does not change the car's steering geometry. This is the very best system for adding Big Brakes & Drop Spindles to your classic GM car! Spindles use 1970-78 Camaro calipers and 1988-92 Camaro 1LE 12” rotors. CPP rotors come with 7/16” wheel studs, original rotors will have 12MM studs.

NEW 2" Drop Spindles with 12" Brakes
5557SWBK-D12 1955-57 Full size drop spindle with 12" rotor. Inquire
5557SWBK-D12-UG 1955-57 Full size drop spindle with 12" rotor. Same as above except includes Drilled/Slotted rotors and Stainless Steel brake hoses.

Inquire

5864SWBK-D12 1958-64 Full size drop spindle with 12" rotor. $439.00

Buy

5864SWBK-D12-UG 1958-64 Full size drop spindle with 12" rotor. Same as above except includes Drilled/Slotted rotors and Stainless Steel brake hoses.

$539.00

Buy

6472SWBK-D12 1964-72 Chevelle drop spindle with 12" rotor. Inquire
6472SWBK-D12-UG 1964-72 Chevelle drop spindle with 12" rotor. Same as above except includes Drilled/Slotted rotors and Stainless Steel brake hoses.

Inquire

6769SWBK-D12 1967-69 Camaro 1968-74 Nova drop spindle with 12" rotor. $409.00

Buy

6769SWBK-D12-UG 1967-69 Camaro 1968-74 Nova drop spindle with 12" rotor. Same as above except includes Drilled/Slotted rotors and Stainless Steel brake hoses.

$509.00

Buy

NEW Stock Height Spindles with 12" Brakes
6472SWBK-S12 1964-72 Chevelle stock height spindle with 12" rotor.

$439.00

Buy

6472SWBK-S12-UG 1964-72 Chevelle stock height spindle with 12" rotor. Same as above except includes Drilled/Slotted rotors and Stainless Steel brake hoses.

$539.00

Buy

NEW 2" Drop Spindles only
5557DS-12 1955-57 Full size drop spindles.

Inquire

5864DS-12 1958-64 Full size drop spindles.

$219.00

Buy

6472DS-12 1964-72 Chevelle drop spindles.

Inquire

6774DS-12 1967-69 Camaro drop spindles.

$189.00

Buy

The spindles work with 1970-78 Camaro calipers and 1988-92 Camaro 1LE 12” rotors.

These will also work with 15” disc brake wheels.

NEW Stock Height Spindles only
6472SS-12 1964-72 Chevelle stock height spindles $219.00

Buy

OE DROP & STOCK SPINDLE WHEEL BRAKE KITS
We offer drop or stock spindle disc brake kits that bolt in place using stock suspesion components. Each spindle has been designed to accept stock ball joints and tie rod ends, making the switch to disc brakes painless and easy. Kits include 2 ½" drop or stock spindles, rotors, calipers, bearings, seals, spindle nuts, caps, banjo bolts and brake hoses. Wheel kits are available in 5-lug and 6-lug applications. May not work with factory drum brake wheels. Note: Factory 6-lug applications had 7/16" dia. studs and 5 on 5-lug kits have 1/2" dia. studs. New design is at original offset!

Chevy Truck - 2” Drop Spindle
6062SWBK-5OE 1960-62, (5x5), 5-lug, kit $599.00

Buy

6062SWBK-6OE 1960-62, (6x5.5), 6-lug, kit $599.00

Buy

6370SWBK-5OE 1963-70, (5x5), 5-lug $599.00

Buy

6370SWBK-6OE 1963-70, (6x5.5), 6-lug $599.00

Buy

Chevy Truck - Stock Height Spindle
6062SWBK-5OE-S 1960-62, (5x5), 5-lug, kit $599.00

Buy

6062SWBK-6OE-S 1960-62, (6x5.5), 6-lug, kit $599.00

Buy

6370SWBK-5OE-S 1963-70, (5x5), 5-lug, kit $599.00

Buy

6370SWBK-6OE-S 1963-70, (6x5.5), 6-lug, kit $599.00

Buy

UPGRADE DROP SPINDLE WHEEL BRAKE KIT
Add disc brakes to your truck and upgrade your stock suspension with one of our disc brake upgrade wheel kits. Our upgrade kits use the more readily available, better designed 1973-87 ball joints and tie rod ends. Kits include the choice of stock height or 2" drop spindles, rotors, loaded calipers, bearings, seals, dust caps, spindle nuts, banjo bolts, upper and lower ball joints, inner and outer tie rod ends and tie rod adjustment sleeves. Kits are available in 5-lug (5 on 5) and 6-lug
applications. May not work with factory drum brake wheels.

Chevy Truck
6370SWBK-5D 1963-70 (5x5), 5-lug drop, kit $699.00

Buy

6370SWBK-6D 1963-70 (6x5.5), 6-lug drop, kit $699.00

Buy

*slotted cross drilled rotors upgrade $75.00

Buy

*SS brake hose upgrade $49.00

Buy

Make your truck disc brake compatible with a set of our disc brake spindles. These are the same spindles sold in our OEM kits and upgrade kits. Cast from the highest quality Ductile Iron with 4140 Chrom-moly CNC machined pins. Accepts factory ball joints and tie rod ends. Designed to use 1971-87 1-1/4” rotors, calipers and bearings. New design is at original offset!

Chevy Truck
CP4S1 1960-62, 2-1/2" drop, set $239.00

Buy

CP4S2 1963-70, 2-1/2" drop, set $239.00

Buy

CP4S3 1971-72, 2-1/2" drop, set $239.00

Buy

CP4S4 1973-87, 2-1/2" drop, set $239.00

Buy

CP4S8 1960-62, stock height, set

$239.00

Buy

CP4S9 1963-70, stock height, set

$239.00

Buy

CP4S10 1971-72, stock height, set

$239.00

Buy

CP4S5 1973-87, stock height, set

$239.00

Buy

 

 

 
 

 
HOME | TECH | BOOKS | SUSPENSION | BRAKES | STEERING | MAILING LIST | CONTACT US | HOT PRODUCTS

Classic Performance Products  378 E Orangethorpe Ave.,  Placentia CA 92870  Tech Line 714-522-2000

© Classic Performance Products. This "website" and all contents are property of Classic Performance Products. 

Prices subject to change without notice. Not responsible for errors or omissions.