CPP’s new Street-TracTM traction bars - where the power meets the road! Constructed from 1" 0.156-wall 4130 (same as our Pro-Touring sway bar), with 3/16" laser-cut, bent-steel mounts and self-lubricating plastic D-type bushings (same as used in our control arms) and 3/4" rod ends. The front mount features additional ground clearance and a forward-slanted approach angle. In the event it does hit something, the angled approach will act as a skid plate and help lift the car over the obstacle. The portion of the linkage that contacts the spring is a wider flat surface; this reduces the stress on the top of the leaf spring. The pivot positions are relocated to optimize weight transfer while reducing the spring load. Our CPP traction bars fit only vehicles with 3” axel tubes.