FOR STEERING, BRAKES AND SUSPENSION

Classic Performance Products 175 East Freedom Avenue Anaheim, CA 92801
 

Back to homepage

5557TCA-LK 1955-57, lower    $479.00/pr

5557TCA-UK 1955-57, upper     $359.00/pr

6372TCA-LK 1963-87 C-10, lower  $529.00/pr

6372TCA-LA 1963-87 C-10, lower (air bags)   $529.00/pr

6372TCA-UK 1963-87 C-10, upper  $327.00/pr

6472TCA-UK 1964-72 Chevelle upper  $337.00/pr

6472TCA-LK 1964-72 Chevelle lower  $445.00/pr

6774TCA-UK 1967-69 Camaro / 1968-74 nova upper  $337.00/pr

6774TCA-LK 1967-69 Camaro / 1968-74 nova lower  $445.00/pr

Tubular Control Arms

Click for Larger Image

Click for Larger Image

5557TCA-LKS 1955-57

5557TCA-UKS 1955-57

6774TCA-UKS

1967-69 Camaro / 1968-74 Nova

Click for Larger Image

Click for Larger Image 

6774TCA-LKS

6372TCA-LKS 1963-87 C-10

6372TCA-LA 1963-87 C-10

 1967-69 Camaro / 1968-74 Nova
   

Click for Larger Image

 

6372TCA-UKS 1963-87 C-10

 6472TCA-LKS 1964-72 Chevelle

6472TCA-UKS 1964-72 Chevelle

 
CPP’s Tubular Control Arms are designed to provide full wheel travel and minimal friction. The upper control arms are made from 1-1/4” x .120” wall and the lower is 1-1/2” x .120 wall D.O.M. tubing and the pivot barrels are thick 1-1/2” .188” wall D.O.M. tubing to eliminate distortion from welding and hard use. The upper control arms allow for 5 degrees of caster. The lower arms provide increased ground clearance and allow the use of sway bars. They can be installed with either factory uppers and lowers, or as a full set. The bushings are made from self lubricating non-squeak patented plastic that will out last any rubber or urethane, and works at temperatures in excess of 400 degrees F.

The Chrome-moly cross shafts and sleeves are zinc plated for lasting performance. The sleeves have an interlocking design that prevents the hardware from ever working loose. The pivots carry both forward and back loads (the original cross shaft pivot was designed to only carry a forward or back load, but not both). The control arm assemblies are a simple bolt-in installation with no modification required. They work with all factory and replacement power steering systems, and with or without O.E. bump stops.

NOTE: Part #6372TCA-LA works with double convoluted air bags.

 

HOME | TECH | BOOKS | SUSPENSION | BRAKES | STEERING | MAILING LIST | CONTACT US | HOT PRODUCTS

Classic Performance Products 175 East Freedom Avenue Anaheim, CA 92801 Tech Line 714-522-2000    Order line 800-522-5004

© Classic Performance Products. This "website" and all contents are property of Classic Performance Products. 

Prices subject to change without notice. Not responsible for errors or omissions.