 |
|
 | ||
|
| ||
|
|
|
| ||
|
| ||
|
 |
 |
 |
 |
| CPP's '32-34 rear anti-roll bar has been designed to bolt on to TCI '32-34 frames. This unit may be adapted to most other frames by installing a simi- lar tubular rear crossmember. | |
| A | Torsion bar mount bolts to rear crossmember using coil-over shock bolts on inboard mounting holes. Outer mounting holes must be drilled. |
| B | Torsion arms should be timed (mounted in |
| the same position on both ends of the bar) and then connected the upper hole in the 4-Link bracket with the special bolt/stud, spacer and rod end links as shown. | |
 |
|
