DROP SPINDLES
READ INSTRUCTIONS COMPLETELY BEFORE ATTEMPTING INSTALLATION!!!
Make sure this kit fits your application before painting or plating.
Parts that have been painted, plated or modified may not be returned.
These Drop Spindles can be used with the following
components:
Calipers
1979-81 El Camino
1979-81 Monte Carlo
Or GM equivalent
Rotors
1979-81 El Camino
1979-81 Monte Carlo
Or GM equivalent
Bearings & Seals
A-6 Inner Bearing
A-3 Outer Bearing
8871 Grease Seal
Hoses & Banjo Bolts
1979-81 Camaro Hose
10 Millimeter Banjo Bolt
Installation Instructions:
- Spindles are marked LH and RH and should be mounted that way. Calipers
will mount towards the back with bleeder screws pointing up.
- Attach the original steering arms with the provided hardware.
- Make sure bearings are packed in grease before installing rotors. Be
sure that high temp bearing grease is used. Install rotors onto spindle.
- Install calipers with bleeder screws pointing up.
- With everything installed turn the wheel left and right to make sure
the spindle assembly is not hitting anything.
- Bleed brake system completely and enjoy.
***A dual reservoir disc brake master cylinder and proportioning valve
must be used. We also recommend installing a power brake booster.
|
